The Genset in the 2 - 75 kVA range have the following features. DIESEL GENERATING SET Air Cooled Water Cooled Single Phase Three Phase Manual start Electric Start / AMF Inductive Set Welding Set Control Panel Mounting 4 Wire 120/240 Volts with 50 / 60 Hz Specifications of 3 - 15 kVA Gensets 12/24 Volt Battery Charging Set For any other specifications please fill the [ Query Form ]

Cooling Systems :-

1. Air Cooled :- Air cooled are of two types.

   	Fan Type :- The fan is mounted on the flywheel side. Air circulates through cowling towards the cylinder and cylinder head.
   	Blower Type :- A blower mounted towards the gear cover is driven by V-belt and powered by the CAM Gear for forced cooling of the cylinder block and head.

2. Water Cooled Radiator Type

Back to TOP 

Loads

1. Resistive : - For simple lighting and power loads.
2. Inductive :-  For motors of higher starting torques.
3. Direct AC Welding :- For welding without welding tranformer.

Back to TOP 

Starting Systems

1. Manual Start :- Handle is used to crank the engine.
2. Electric Start :- 12 Volt Battery operated starting system.
3. AMF :-             Auto Mains Failure. The Genset starts within 7 - 10 seconds on the mains failure and Genset stops automatically within 7 seconds of the resumption of main power.

Back to TOP 

Mounting System

Mountings are Sturdy channelled base plates with any of the below

• Anti-vibration padding
• Trolley wheels
• Trailer mountings

Back to TOP 

Control Panel Cubicles

• Fabricated from sheet steel
• Louvres provided for cooling
• Fitted with Voltmeter, Ammeter
• Changeover Switches, Selector switches, HRC switches
• MCB
• Optional :- Time Totalizer, Lub. Oil Pressure Gauge, Water Temp. Gauge, Digital Meters, Audio and Visual Protecting Devices, Frequency Meter etc...

Back to TOP